Category:FIRE HOSE

Brand:

FIREFIGHTING HOSE MANUFACTURED TO BS, NFPA AND FM APPROVED

Three-layer Firefighting Hose Reinforced with Woven 100% Synthetic Fibers.
Extruded “Through the Weave” Synthetic Nitrile Rubber Inner and Outer Layer.
Smooth Bore Internal Tube, Ribbed Outer Cover For High Performance and Long Life.
Storage Temperature to 50 ํC and Working Temperature to 600 ํC.
Excellent Chemical Resistance. Easy Maintenance, Use, Roll-up and Store.
Each Length Marked with FM Inspection Code, Test and Compliance Certificate.

Model	DIA.	Working Pressure	Bursting Pressure	Weight" (KG)
Armtex	1 1/2"	300	910	10.0
Armtex	1 3/4"	300	900	11.5
Armtex	2 1/2"	300	780	18.0
Armtex	3"	200	700	21.0
Armtex	4"	200	700	36.0
Armtex 600	1 1/2"	350	900	14.5
Armtex 600	2 1/2"	350	900	22.5

*Weight: 30m length

FIRE HOSE STANDARDS

BURST PRESSURE - Test Performed to Burst Limit, Test Without Couplings.
ACCEPTANCE (TEST) PRESSURE - Test Performed to 66% of Burst Pressure.
WORKING SERVICE TEST PRESSURE - Test Performed with Couplings According to NFPA or BS Standard. NFPA 1961 Working Service Test Pressure for New Hose:
1.5” Diameter Hose- 300 PSI for 10 minutes
2.5” Diameter Hose- 250 PSI for 10 Minutes
4” Diameter Hose- 200 PSI for 10 Minutes

RUBBER HOSE REPAIR SYSTEM - REPAIR ARMTEX AND BLINDEX HOSE

Repair Holes Caused by Punctures
Repair Tears Caused by Abrasion
2-Layer Vulcanized Repairs, Red and Yellow
For Hoses 1.5" to 4". For Holes and Tears 1/8" to 2"
After Repair, Hose Repair is Tested to 200 PSI (13.8 Bar)

EUROPE AND UNITED KINGDOM (ENGLAND) STANDARDS

BS6391 - UK STANDARD
TYPE 1 - Woven Hose
TYPE 2 - Woven and Coated Hose
TYPE 3 - Rubber Extruded Hose
BS336 - British Standard for 2.5" (64mm) Instantaneous Couplings
TEST STANDARD: 1.5" & 2.5" (22.5 BAR FOR 1 Minute)
EN STANDARD: EN694 and EN14510 Woven Hose
SPANISH STANDARD: UNE
3RD PARTY INTERNATIONAL TESTING LABS (According to Standards)
FM, AENOR, Certied Testing Labs